Many of your sewing machine issues are typically the result of poor maintenance or failure to care. Although the life of your machine will depend on how much you use it, spending only a few minutes daily, weekly, or monthly and using some basic tools, you can ensure the smooth running of your machine. Below are a few guidelines you can follow to take care of a sewing machine and keep it away from the repair shop.
Keep it Capped
You don’t want dirt, grime, grit, or animal hair to make their way to your machine and seed a wide range of problems, particularly for a computerized machine with the printed circuit board. To avoid this, do not place your machine close to an open window, and keep it covered every time it is not in use. Your options include buying an off-the-rack plastic cover from a machine or notions dealer or making it yourself. You may also bring an old pillowcase into use. In any case, keep it wrapped when the machine is sitting idle.
Wind Bobbins Correctly
Make sure that when you insert a bobbin into the bobbin case, there are no thread tails swinging from it. These tails can block the machine and result in the breakage of the upper thread. What’s more, there is no such thing as a common bobbin. You should always use a bobbin intended for your machine for the sake of desisting missed stitches, noise, loose threads, and also lasting impairment to the bobbin case.
Change Your Needles Frequently
Replace the needle of your machine every four hours of sewing spell. While sewing, the needle goes through the cloth thousands of times each minute and does two things: it makes an opening in the cloth for the thread to move through, and it makes a loop with the thread to form the stitch. This loop is picked up the bobbin hook by moving only .05 mm or lower behind the needle. Therefore, there are chances of having missed stitches, looped or broken threads, runs and pulls in the cloth, or even impairment in your machine in case the needle gets bent or dull.
Regular Cleaning is Fundamental
Make a habit of cleaning your machine after each sewing task. Take after the directions in your manual or consult your machine mechanic to demonstrate you how. Primarily, you can effectively and quickly achieve a standard cleaning if the following procedure is followed:
Begin with the top and wipe with a doubled fine muslin piece the tension disks. Make sure that while you’re cleaning, the presser foot is held up and the tension springs are relaxed so the muslin can conveniently glide between the disks, removing any build up or fluff. A compressed-air can may be blown from back to front to dislodge particles surrounding the tension disks and swab other spaces inside the machine. Blowing into a machine yourself will cause corrosion as the breath has moisture.
If you’re thinking about replacing your current sewing machine, you can read the top rated sewing machine reviews on the internet to decide which one suits your needs and budget the best.
The above maintenance routine can be easily carried off without anyone’s help, but it is recommended to get a checkup done by your licensed mechanic or dealer at regular intervals of two years. Your machine will run for years if you take out some time and give it proper care.